01777874520 Lines Open Monday - Friday 8.30am - 5px
(0)
£0.00

26.4mm dia x 6.2mm thick x 6.2mm c/sink PTFE Coated Neodymium Magnet - 6kg Pull

code: D-F313NS-PTFE

High-performance countersunk Neodymium (N42) magnet, available with either pole on the countersunk face. PTFE coated for high corrosion resistance.

1. Select Polarities Further Information
2. Select Pack Size
Pack Qty Pack Price Unit Price

2. Select Pack Size

26.4mm dia x 6.2mm thick x 6.2mm c/sink PTFE Coated Neodymium Magnet - 6kg Pull ( North ) ( Pack of 1 )
26.4mm dia x 6.2mm thick x 6.2mm c/sink PTFE Coated Neodymium Magnet - 6kg Pull ( North ) ( Pack of 1 )

High-performance countersunk Neodymium (N42) magnet, available with either pole on the countersunk face. PTFE coated for high corrosion resistance.

  • 26.4mm diameter x 6.2mm thick with a 6.2mm diameter countersunk hole for fixing
  • Each magnet has its north pole on the countersunk face
  • Each magnet can support 6kg pull vertically from the magnetic face when in flush contact with a mild steel surface
  • PTFE coated to increase friction and prevent marking other contact surfaces
  • Can be fixed in place with our 6mm diameter countersunk screws

Ideal for furniture fixings, hanging artwork and keeping doors and drawers closed, countersunk magnets have a central hole which allows them to be fixed to non-magnetic surfaces with a screw. Because these magnets have a PTFE-coating they are ideal for using to attract fragile or easily marked surfaces, the PTFE coating increases friction, softens impacts and prevents marking. Countersunk magnets with opposite poles on the countersunk face can be used to attract two surfaces or two opposing countersunk magnets with the same pole on the countersunk face can be used to create a damping, shock absorbing or repelling effect. Also available with the south pole on the countersunk face.

£5.01 Now £5.01 each Was: £7.16 each

2. Select Pack Size

26.4mm dia x 6.2mm thick x 6.2mm c/sink PTFE Coated Neodymium Magnet - 6kg Pull ( North ) ( Pack of 10 )
26.4mm dia x 6.2mm thick x 6.2mm c/sink PTFE Coated Neodymium Magnet - 6kg Pull ( North ) ( Pack of 10 )

High-performance countersunk Neodymium (N42) magnet, available with either pole on the countersunk face. PTFE coated for high corrosion resistance.

  • Pack of 10
  • 26.4mm diameter x 6.2mm thick with a 6.2mm diameter countersunk hole for fixing
  • Each magnet has its north pole on the countersunk face
  • Each magnet can support 6kg pull vertically from the magnetic face when in flush contact with a mild steel surface
  • PTFE coated to increase friction and prevent marking other contact surfaces
  • Can be fixed in place with our 6mm diameter countersunk screws

Ideal for furniture fixings, hanging artwork and keeping doors and drawers closed, countersunk magnets have a central hole which allows them to be fixed to non-magnetic surfaces with a screw. Because these magnets have a PTFE-coating they are ideal for using to attract fragile or easily marked surfaces, the PTFE coating increases friction, softens impacts and prevents marking. Countersunk magnets with opposite poles on the countersunk face can be used to attract two surfaces or two opposing countersunk magnets with the same pole on the countersunk face can be used to create a damping, shock absorbing or repelling effect. Also available with the south pole on the countersunk face.

£46.50 Now £4.65 each Was: £6.64 each

2. Select Pack Size

26.4mm dia x 6.2mm thick x 6.2mm c/sink PTFE Coated Neodymium Magnet - 6kg Pull ( North ) ( Pack of 20 )
26.4mm dia x 6.2mm thick x 6.2mm c/sink PTFE Coated Neodymium Magnet - 6kg Pull ( North ) ( Pack of 20 )

High-performance countersunk Neodymium (N42) magnet, available with either pole on the countersunk face. PTFE coated for high corrosion resistance.

  • Pack of 20
  • 26.4mm diameter x 6.2mm thick with a 6.2mm diameter countersunk hole for fixing
  • Each magnet has its north pole on the countersunk face
  • Each magnet can support 6kg pull vertically from the magnetic face when in flush contact with a mild steel surface
  • PTFE coated to increase friction and prevent marking other contact surfaces
  • Can be fixed in place with our 6mm diameter countersunk screws

Ideal for furniture fixings, hanging artwork and keeping doors and drawers closed, countersunk magnets have a central hole which allows them to be fixed to non-magnetic surfaces with a screw. Because these magnets have a PTFE-coating they are ideal for using to attract fragile or easily marked surfaces, the PTFE coating increases friction, softens impacts and prevents marking. Countersunk magnets with opposite poles on the countersunk face can be used to attract two surfaces or two opposing countersunk magnets with the same pole on the countersunk face can be used to create a damping, shock absorbing or repelling effect. Also available with the south pole on the countersunk face.

£85.79 Now £4.29 each Was: £6.13 each

2. Select Pack Size

26.4mm dia x 6.2mm thick x 6.2mm c/sink PTFE Coated Neodymium Magnet - 6kg Pull ( North ) ( Pack of 40 )
26.4mm dia x 6.2mm thick x 6.2mm c/sink PTFE Coated Neodymium Magnet - 6kg Pull ( North ) ( Pack of 40 )

High-performance countersunk Neodymium (N42) magnet, available with either pole on the countersunk face. PTFE coated for high corrosion resistance.

  • Pack of 40
  • 26.4mm diameter x 6.2mm thick with a 6.2mm diameter countersunk hole for fixing
  • Each magnet has its north pole on the countersunk face
  • Each magnet can support 6kg pull vertically from the magnetic face when in flush contact with a mild steel surface
  • PTFE coated to increase friction and prevent marking other contact surfaces
  • Can be fixed in place with our 6mm diameter countersunk screws

Ideal for furniture fixings, hanging artwork and keeping doors and drawers closed, countersunk magnets have a central hole which allows them to be fixed to non-magnetic surfaces with a screw. Because these magnets have a PTFE-coating they are ideal for using to attract fragile or easily marked surfaces, the PTFE coating increases friction, softens impacts and prevents marking. Countersunk magnets with opposite poles on the countersunk face can be used to attract two surfaces or two opposing countersunk magnets with the same pole on the countersunk face can be used to create a damping, shock absorbing or repelling effect. Also available with the south pole on the countersunk face.

£157.17 Now £3.93 each Was: £5.61 each
Higher Quantities? Contact us today for volume pricing.
Item in Stock  |  Same Day Dispatch Before 4pm (Mon - Fri)
£5.01
4.00 out of 5 based on 1 rating.
Showing our 1 review for 26.4mm dia x 6.2mm thick x 6.2mm c/sink PTFE Coated Neodymium Magnet - 6kg Pull. Write a review ›
  • Currently 4/5 Stars.
4Always room for improvement, even with a good product

This magnet was one of three different styles that I had purchased of similar size, but the same style. The other two were of a cheaper variety, they were not plastic clad and smashed themselves to pieces before long.

From those false starts was where I got the idea to opt for a plastic coated one, it made so much sense. Indeed, now in my possession, it is far more robust, performing as imagined and I am happy with it.

However, I cannot ignore the fact that the plastic used, although also available in black, is white and that it for a reason. The issue I have is that the top face of the magnet (with the widest surface area) allows the dark internal magnet to show through, is semi-transparent in appearance and not opaque, as in the imagery provided here on the website. I think Neodymium magnets would be strong enough to perform with a few more microns thicker plastic case to suitably disguise its internal magnet so it were to appear all white, this after all is a key feature of the product - its colour.

Following on from this I would also recommend that a white coloured screw be included with this magnet as it's likely to be used as a display piece. Failing that, if costs are too high, then a fitted matching white plastic cap for a philips screw included, giving a more seamless finish.

The added cost of these improvements would be minimal and save the customer a lot of time themselves. After all, the packing issued in order to ensure safe delivery was par-excellence, so why not go the extra mile with the final product as well?

| Write a Review ›