This high power industrial Neodymium magnet has a very deep depth of magnetic field and is supplied with self adhesive on the North Pole. Simply peel away the adhesive backing paper and stick it under your water jug to magnetise the water inside with North Pole energy. These magnets are extremely powerful, so please read the health and safety sheet that is sent with each magnet.
A pack of 1 - Adhesive 50mm x 50mm x 5mm thick N42 Neodymium Magnets. The SOUTH pole is on the showing magnetic face and the NORTH pole is on the face covered in adhesive. These Magnets are plated with 3 layers of protective coatings - Nickel + Copper + Nickel (Ni-Cu-Ni).
Product Code: F320SA-1
Pack Size: 1
Shape: Square
Magnetic Face: 50 x 50
Thickness: 5mm
Grade: N42
Plating: Ni-Cu-Ni ( Nickel )
Material: NdFeB ( Neodymium )
Performance (Gauss): 1100
Vertical Pull (Kg): 14.9
Slide Resistance (Kg): 2.98
Max Temp (degrees C): 50
Fixing: 3M Self Adhesive
These magnets will have approximately 1100 Gauss on each face. Each magnet can support a steel weight of up to 14.9kg vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness to the magnet. Each magnet can also support up to 2.98kgs in a shear position before beginning to slide down a steel surface under the same conditions. These magnets can be fixed in place using 3M Self Adhesive and have a maximum operating temperature of 50 degrees C.
Extreme Power Warning!
These magnets are dangerous! If your fingers are trapped between two they will cut the skin. Please note that they should only be handled with great care.











Follow us on Twitter & Facebook to hear about our latest offers & Promotions