This magnet can be fixed in place using an M6 countersunk screw and has a 0.8mm thick rubber coating to increase friction and to soften impacts and prevent marking. The finished size of the magnet including the rubber jacket is 41.6 dia x 6.6mm.
A pack of 1 - 40mm dia x 5mm thick x 6.0mm c/sink N42 Neodymium Magnets. The SOUTH pole is on the countersunk face and the NORTH pole is on the opposite face. These Magnets are plated with 3 layers of protective coatings - Nickel + Copper + Nickel (Ni-Cu-Ni).
Product Code: F360RS-1
Pack Size: 1
Shape: Disc/Ring
Magnetic Face: 40mm dia
Thickness: 5mm
Grade: N42
Plating: Ni-Cu-Ni ( Nickel )
Material: NdFeB ( Neodymium )
Performance (Gauss): 1600
Vertical Pull (Kg): 5
Slide Resistance (Kg): 2.5
Max Temp (degrees C): 80
Fixing: M6 c/s Screw
These magnets will have approximately 1600 Gauss on each face. Each magnet can support a steel weight of up to 5kg vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness to the magnet. Each magnet can also support up to 2.5kgs in a shear position before beginning to slide down a steel surface under the same conditions. These magnets can be fixed in place using M6 c/s Screw and have a maximum operating temperature of 80 degrees C.
Extreme Power Warning!
These magnets are dangerous! If your fingers are trapped between two they will cut the skin. Please note that they should only be handled with great care.



Follow us on Twitter & Facebook to hear about our latest offers & Promotions