These magnets are 48mm dia x 47mm from the magnetic face of the magnet to the top of the hook. The Pot magnet base is 24mm tall from the magnetic face of the magnet to the top of it's threaded collar. The magnetic collar is 12mm dia and has a M5 thread x 10mm deep. The internal diameter of the hook is 10mm and the removed hook is 30mm from the base tip of the thread to the top of its curve.
A pack of 1 - 48mm dia x 24mm thick N42 Neodymium Clamping Magnet with M5 Hook from the back. The NORTH pole is on the centre of the front face and the SOUTH is on the outer edge around it (both poles are on the same face). These Magnets are plated with 3 layers of protective coatings - Nickel + Copper + Nickel (Ni-Cu-Ni).
Product Code: F4ME48M5-HOOK-1
Pack Size: 1
Shape: Pot/Hook
Magnetic Face: 48mm dia
Thickness: 24mm
Grade: N42
Plating: Ni-Cu-Ni ( Nickel )
Material: NdFeB ( Neodymium )
Vertical Pull (Kg): 81
Slide Resistance (Kg): 16.2
Max Temp (degrees C): 80
Fixing: Clamping Magnet
Each magnet can support a steel weight of up to 81kg vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness to the magnet. Each magnet can also support up to 16.2kgs in a shear position before beginning to slide down a steel surface under the same conditions. These magnets can be fixed in place using a Clamping Magnet and have a maximum operating temperature of 80 degrees C.
Extreme Power Warning!
These magnets are dangerous! If your fingers are trapped between two they will cut the skin. Please note that they should only be handled with great care.
Follow us on Twitter & Facebook to hear about our latest offers & Promotions