01777874520 Lines Open Monday - Friday 8.30am - 5px
(0)
£0.00

100mm dia x 22mm thick x 11mm hole Ferrite Pot Magnet - 68kg Pull

code: D-F4MG100

These large ferrite (Y30BH) pot magnets are chrome plated with a plain through hole on the non-magnetic face. Magnetism is concentrated on one face to provide the maximum holding force.

1. Select Pack Size
Pack Qty Pack Price Unit Price

1. Select Pack Size

100mm dia x 22mm thick x 11mm hole Ferrite Pot Magnet  - 68kg Pull ( Pack of 1 )
100mm dia x 22mm thick x 11mm hole Ferrite Pot Magnet - 68kg Pull ( Pack of 1 )

These large ferrite (Y30BH) pot magnets are chrome plated with a plain through hole on the non-magnetic face. Magnetism is concentrated on one face to provide the maximum holding force.

  • 100mm diameter x 22mm thick with a 11mm diameter plain through hole for a screw or bolt
  • Each magnet can support 68kg pull vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness
  • Chrome plated steel shell
  • Can be fixed in place with 10mm diameter cap head screws

Outstanding value for money, these ferrite pot magnets are made of a ferrite magnet sunken in to a steel shell meaning that the north pole is on the centre of the magnetic face and the south pole is on the outer edge around it. The steel pot increases the adhesive force of the magnets giving them a strong hold for their size. An added advantage of pot magnets is that they are resistant to chipping or cracking following constant impact with a steel surface. These magnets come with a safe-handling warning; because they are so powerful they can be dangerous if not handled carefully.

£5.10 £5.10 each

1. Select Pack Size

100mm dia x 22mm thick x 11mm hole Ferrite Pot Magnet  - 68kg Pull ( Pack of 10 )
100mm dia x 22mm thick x 11mm hole Ferrite Pot Magnet - 68kg Pull ( Pack of 10 )

These large ferrite (Y30BH) pot magnets are chrome plated with a plain through hole on the non-magnetic face. Magnetism is concentrated on one face to provide the maximum holding force.

  • Pack of 10
  • 100mm diameter x 22mm thick with a 11mm diameter plain through hole for a screw or bolt
  • Each magnet can support 68kg pull vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness
  • Chrome plated steel shell
  • Can be fixed in place with 10mm diameter cap head screws

Outstanding value for money, these ferrite pot magnets are made of a ferrite magnet sunken in to a steel shell meaning that the north pole is on the centre of the magnetic face and the south pole is on the outer edge around it. The steel pot increases the adhesive force of the magnets giving them a strong hold for their size. An added advantage of pot magnets is that they are resistant to chipping or cracking following constant impact with a steel surface. These magnets come with a safe-handling warning; because they are so powerful they can be dangerous if not handled carefully.

£48.92 £4.89 each

1. Select Pack Size

100mm dia x 22mm thick x 11mm hole Ferrite Pot Magnet  - 68kg Pull ( Pack of 20 )
100mm dia x 22mm thick x 11mm hole Ferrite Pot Magnet - 68kg Pull ( Pack of 20 )

These large ferrite (Y30BH) pot magnets are chrome plated with a plain through hole on the non-magnetic face. Magnetism is concentrated on one face to provide the maximum holding force.

  • Pack of 20
  • 100mm diameter x 22mm thick with a 11mm diameter plain through hole for a screw or bolt
  • Each magnet can support 68kg pull vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness
  • Chrome plated steel shell
  • Can be fixed in place with 10mm diameter cap head screws

Outstanding value for money, these ferrite pot magnets are made of a ferrite magnet sunken in to a steel shell meaning that the north pole is on the centre of the magnetic face and the south pole is on the outer edge around it. The steel pot increases the adhesive force of the magnets giving them a strong hold for their size. An added advantage of pot magnets is that they are resistant to chipping or cracking following constant impact with a steel surface. These magnets come with a safe-handling warning; because they are so powerful they can be dangerous if not handled carefully.

£90.64 £4.53 each

1. Select Pack Size

100mm dia x 22mm thick x 11mm hole Ferrite Pot Magnet  - 68kg Pull ( Pack of 40 )
100mm dia x 22mm thick x 11mm hole Ferrite Pot Magnet - 68kg Pull ( Pack of 40 )

These large ferrite (Y30BH) pot magnets are chrome plated with a plain through hole on the non-magnetic face. Magnetism is concentrated on one face to provide the maximum holding force.

  • Pack of 40
  • 100mm diameter x 22mm thick with a 11mm diameter plain through hole for a screw or bolt
  • Each magnet can support 68kg pull vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness
  • Chrome plated steel shell
  • Can be fixed in place with 10mm diameter cap head screws

Outstanding value for money, these ferrite pot magnets are made of a ferrite magnet sunken in to a steel shell meaning that the north pole is on the centre of the magnetic face and the south pole is on the outer edge around it. The steel pot increases the adhesive force of the magnets giving them a strong hold for their size. An added advantage of pot magnets is that they are resistant to chipping or cracking following constant impact with a steel surface. These magnets come with a safe-handling warning; because they are so powerful they can be dangerous if not handled carefully.

£162.74 £4.07 each
Higher Quantities? Contact us today for volume pricing.
Item in Stock  |  Same Day Dispatch Before 4pm (Mon - Fri)
£5.10
Product Code: F4MG100
Shape: Pot
Magnetic Face: 100mm dia
Thickness: 22mm
Grade: Y30BH
Material: Ferrite
Vertical Pull (Kg): 68
Slide Resistance (Kg): 13.6
Max Temp (degrees C): 180
Fixing: 10mm Cap Head Screw
  • 100mm diameter x 22mm thick with a 11mm diameter plain through hole for a screw or bolt
  • Each magnet can support 68kg pull vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness
  • Chrome plated steel shell
  • Can be fixed in place with 10mm diameter cap head screws

Outstanding value for money, these ferrite pot magnets are made of a ferrite magnet sunken in to a steel shell meaning that the north pole is on the centre of the magnetic face and the south pole is on the outer edge around it. The steel pot increases the adhesive force of the magnets giving them a strong hold for their size. An added advantage of pot magnets is that they are resistant to chipping or cracking following constant impact with a steel surface. These magnets come with a safe-handling warning; because they are so powerful they can be dangerous if not handled carefully.

Be the first to review 100mm dia x 22mm thick x 11mm hole Ferrite Pot Magnet - 68kg Pull. Write a review ›