01777874520 Lines Open Monday - Friday 8.30am - 5px
(0)
£0.00

14mm dia x 3.6mm thick x 3mm c/bore N42 Neodymium Stainless Steel Pot Magnet - 5.2kg Pull

code: D-F4MB14S

Small and shallow but very strong, these high-performance Neodymium (N42) pot magnets have a counter-bored hole on the magnetic face. Magnetism is concentrated on one face to provide the maximum holding force.

1. Select Pack Size
Pack Qty Pack Price Unit Price

1. Select Pack Size

14mm dia x 3.5mm thick x 3mm c/bore N42 Neodymium Stainless Steel Pot Magnet - 5.2kg Pull ( Pack of 1 )
14mm dia x 3.5mm thick x 3mm c/bore N42 Neodymium Stainless Steel Pot Magnet - 5.2kg Pull ( Pack of 1 )

Small and shallow but very strong, these high-performance Neodymium (N42) pot magnets have a counter-bored hole on the magnetic face. Magnetism is concentrated on one face to provide the maximum holding force.

  • 14mm diameter x 3.5mm thick with a 3mm diameter counter bore hole for fixing
  • Each magnet is only magnetic on the countersunk face
  • Each magnet can support 5.2kg pull vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness
  • Coated with three layers of nickel, copper and nickel to reduce corrosion and provide a smooth finish
  • Can be fixed in place with 3mm diameter countersunk screws

Neodymium pot magnets are made of a powerful Neodymium magnet sunken in to a stainless steel shell meaning that the north pole is on the centre of the magnetic face and the south pole is on the outer edge around it. The stainless steel pot increases the adhesive force of the magnets giving them an incredible hold for their size and also increases their resistance to corrosion. An added advantage of pot magnets is that they are resistant to chipping or cracking following constant impact with a steel surface. These magnets are counter-bored on the magnetic face and can be fixed to a surface with a 3mm screw, pot magnets are also available with countersinks and threaded studs.

£1.80 £1.80 each

1. Select Pack Size

14mm dia x 3.5mm thick x 3mm c/bore N42 Neodymium Stainless Steel Pot Magnet - 5.2kg Pull ( Pack of 10 )
14mm dia x 3.5mm thick x 3mm c/bore N42 Neodymium Stainless Steel Pot Magnet - 5.2kg Pull ( Pack of 10 )

Small and shallow but very strong, these high-performance Neodymium (N42) pot magnets have a counter-bored hole on the magnetic face. Magnetism is concentrated on one face to provide the maximum holding force.

  • Pack of 10
  • 14mm diameter x 3.5mm thick with a 3mm diameter counter bore hole for fixing
  • Each magnet is only magnetic on the countersunk face
  • Each magnet can support 5.2kg pull vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness
  • Coated with three layers of nickel, copper and nickel to reduce corrosion and provide a smooth finish
  • Can be fixed in place with 3mm diameter countersunk screws

Neodymium pot magnets are made of a powerful Neodymium magnet sunken in to a stainless steel shell meaning that the north pole is on the centre of the magnetic face and the south pole is on the outer edge around it. The stainless steel pot increases the adhesive force of the magnets giving them an incredible hold for their size and also increases their resistance to corrosion. An added advantage of pot magnets is that they are resistant to chipping or cracking following constant impact with a steel surface. These magnets are counter-bored on the magnetic face and can be fixed to a surface with a 3mm screw, pot magnets are also available with countersinks and threaded studs.

£15.96 £1.60 each

1. Select Pack Size

14mm dia x 3.5mm thick x 3mm c/bore N42 Neodymium Stainless Steel Pot Magnet - 5.2kg Pull ( Pack of 50 )
14mm dia x 3.5mm thick x 3mm c/bore N42 Neodymium Stainless Steel Pot Magnet - 5.2kg Pull ( Pack of 50 )

Small and shallow but very strong, these high-performance Neodymium (N42) pot magnets have a counter-bored hole on the magnetic face. Magnetism is concentrated on one face to provide the maximum holding force.

  • Pack of 50
  • 14mm diameter x 3.5mm thick with a 3mm diameter counter bore hole for fixing
  • Each magnet is only magnetic on the countersunk face
  • Each magnet can support 5.2kg pull vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness
  • Coated with three layers of nickel, copper and nickel to reduce corrosion and provide a smooth finish
  • Can be fixed in place with 3mm diameter countersunk screws

Neodymium pot magnets are made of a powerful Neodymium magnet sunken in to a stainless steel shell meaning that the north pole is on the centre of the magnetic face and the south pole is on the outer edge around it. The stainless steel pot increases the adhesive force of the magnets giving them an incredible hold for their size and also increases their resistance to corrosion. An added advantage of pot magnets is that they are resistant to chipping or cracking following constant impact with a steel surface. These magnets are counter-bored on the magnetic face and can be fixed to a surface with a 3mm screw, pot magnets are also available with countersinks and threaded studs.

£66.95 £1.34 each

1. Select Pack Size

14mm dia x 3.5mm thick x 3mm c/bore N42 Neodymium Stainless Steel Pot Magnet - 5.2kg Pull ( Pack of 100 )
14mm dia x 3.5mm thick x 3mm c/bore N42 Neodymium Stainless Steel Pot Magnet - 5.2kg Pull ( Pack of 100 )

Small and shallow but very strong, these high-performance Neodymium (N42) pot magnets have a counter-bored hole on the magnetic face. Magnetism is concentrated on one face to provide the maximum holding force.

  • Pack of 100
  • 14mm diameter x 3.5mm thick with a 3mm diameter counter bore hole for fixing
  • Each magnet is only magnetic on the countersunk face
  • Each magnet can support 5.2kg pull vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness
  • Coated with three layers of nickel, copper and nickel to reduce corrosion and provide a smooth finish
  • Can be fixed in place with 3mm diameter countersunk screws

Neodymium pot magnets are made of a powerful Neodymium magnet sunken in to a stainless steel shell meaning that the north pole is on the centre of the magnetic face and the south pole is on the outer edge around it. The stainless steel pot increases the adhesive force of the magnets giving them an incredible hold for their size and also increases their resistance to corrosion. An added advantage of pot magnets is that they are resistant to chipping or cracking following constant impact with a steel surface. These magnets are counter-bored on the magnetic face and can be fixed to a surface with a 3mm screw, pot magnets are also available with countersinks and threaded studs.

£123.60 £1.24 each
Higher Quantities? Contact us today for volume pricing.
Item in Stock  |  Same Day Dispatch Before 4pm (Mon - Fri)
£1.80
Product Code: F4MB14S
Shape: Pot/Disc
Magnetic Face: 14mm dia
Thickness: 3.6mm
Grade: N42
Plating: Ni-Cu-Ni ( Nickel )
Material: NdFeB
Vertical Pull (Kg): 5.2
Slide Resistance (Kg): 1.04
Max Temp (degrees C): 80
Fixing: 3mm Cap Head Screw
  • 14mm diameter x 3.6mm thick with a 3mm diameter counter bore hole for fixing
  • Each magnet is only magnetic on the countersunk face
  • Each magnet can support 5.2kg pull vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness
  • Coated with three layers of nickel, copper and nickel to reduce corrosion and provide a smooth finish
  • Can be fixed in place with 3mm diameter countersunk screws

Neodymium pot magnets are made of a powerful Neodymium magnet sunken in to a stainless steel shell meaning that the north pole is on the centre of the magnetic face and the south pole is on the outer edge around it. The stainless steel pot increases the adhesive force of the magnets giving them an incredible hold for their size and also increases their resistance to corrosion. An added advantage of pot magnets is that they are resistant to chipping or cracking following constant impact with a steel surface. These magnets are counter-bored on the magnetic face and can be fixed to a surface with a 3mm screw, pot magnets are also available with countersinks and threaded studs.

Be the first to review 14mm dia x 3.6mm thick x 3mm c/bore N42 Neodymium Stainless Steel Pot Magnet - 5.2kg Pull. Write a review ›