01777874520 Lines Open Monday - Friday 8.30am - 5px
(0)
£0.00

22mm dia x 10mm thick x M5 thread hole Rubber Coated Pot Magnet - 3.8kg Pull

code: D-F606R

Small and strong, these high-performance, rubber-coated Neodymium (N42) pot magnets have a threaded hole on the non-magnetic face. Magnetism is concentrated on one face to provide the maximum holding force.

1. Select Pack Size
Pack Qty Pack Price Unit Price

1. Select Pack Size

22mm dia x 10mm thick x M5 thread hole Rubber Coated Pot Magnet - 3.8kg Pull ( Pack of 1 )
22mm dia x 10mm thick x M5 thread hole Rubber Coated Pot Magnet - 3.8kg Pull ( Pack of 1 )

Small and strong, these high-performance, rubber-coated Neodymium (N42) pot magnets have a threaded hole on the non-magnetic face. Magnetism is concentrated on one face to provide the maximum holding force.

  • 22mm diameter x 10mm tall with a M5 threaded hole
  • Each magnet can support 3.8kg vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness
  • Rubber-coated to increase friction and prevent marking other contact surfaces
  • M5 threaded hole for assembly

Neodymium pot magnets are made of a powerful Neodymium magnet sunken in to a steel shell meaning that the north pole is on the centre of the magnetic face and the south pole is on the outer edge around it. The steel pot increases the adhesive force of the magnets giving them an incredible hold for their size. Because these magnets have a rubber-coating they are ideal for using to attract fragile or easily marked surfaces, the rubber coating increases friction, softens impacts and prevents marking. An added advantage of pot magnets is that they are resistant to chipping or cracking following constant impact with a steel surface.

£4.12 £4.12 each

1. Select Pack Size

22mm dia x 10mm thick x M5 thread hole Rubber Coated Pot Magnet - 3.8kg Pull ( Pack of 4 )
22mm dia x 10mm thick x M5 thread hole Rubber Coated Pot Magnet - 3.8kg Pull ( Pack of 4 )

Small and strong, these high-performance, rubber-coated Neodymium (N42) pot magnets have a threaded hole on the non-magnetic face. Magnetism is concentrated on one face to provide the maximum holding force.

  • Pack of 4
  • 22mm diameter x 10mm tall with a M5 threaded hole
  • Each magnet can support 3.8kg vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness
  • Rubber-coated to increase friction and prevent marking other contact surfaces
  • M5 threaded hole for assembly

Neodymium pot magnets are made of a powerful Neodymium magnet sunken in to a steel shell meaning that the north pole is on the centre of the magnetic face and the south pole is on the outer edge around it. The steel pot increases the adhesive force of the magnets giving them an incredible hold for their size. Because these magnets have a rubber-coating they are ideal for using to attract fragile or easily marked surfaces, the rubber coating increases friction, softens impacts and prevents marking. An added advantage of pot magnets is that they are resistant to chipping or cracking following constant impact with a steel surface.

£14.42 £3.61 each

1. Select Pack Size

22mm dia x 10mm thick x M5 thread hole Rubber Coated Pot Magnet - 3.8kg Pull ( Pack of 40 )
22mm dia x 10mm thick x M5 thread hole Rubber Coated Pot Magnet - 3.8kg Pull ( Pack of 40 )

Small and strong, these high-performance, rubber-coated Neodymium (N42) pot magnets have a threaded hole on the non-magnetic face. Magnetism is concentrated on one face to provide the maximum holding force.

  • Pack of 40
  • 22mm diameter x 10mm tall with a M5 threaded hole
  • Each magnet can support 3.8kg vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness
  • Rubber-coated to increase friction and prevent marking other contact surfaces
  • M5 threaded hole for assembly

Neodymium pot magnets are made of a powerful Neodymium magnet sunken in to a steel shell meaning that the north pole is on the centre of the magnetic face and the south pole is on the outer edge around it. The steel pot increases the adhesive force of the magnets giving them an incredible hold for their size. Because these magnets have a rubber-coating they are ideal for using to attract fragile or easily marked surfaces, the rubber coating increases friction, softens impacts and prevents marking. An added advantage of pot magnets is that they are resistant to chipping or cracking following constant impact with a steel surface.

£131.84 £3.30 each

1. Select Pack Size

22mm dia x 10mm thick x M5 thread hole Rubber Coated Pot Magnet - 3.8kg Pull ( Pack of 80 )
22mm dia x 10mm thick x M5 thread hole Rubber Coated Pot Magnet - 3.8kg Pull ( Pack of 80 )

Small and strong, these high-performance, rubber-coated Neodymium (N42) pot magnets have a threaded hole on the non-magnetic face. Magnetism is concentrated on one face to provide the maximum holding force.

  • Pack of 80
  • 22mm diameter x 10mm tall with a M5 threaded hole
  • Each magnet can support 3.8kg vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness
  • Rubber-coated to increase friction and prevent marking other contact surfaces
  • M5 threaded hole for assembly

Neodymium pot magnets are made of a powerful Neodymium magnet sunken in to a steel shell meaning that the north pole is on the centre of the magnetic face and the south pole is on the outer edge around it. The steel pot increases the adhesive force of the magnets giving them an incredible hold for their size. Because these magnets have a rubber-coating they are ideal for using to attract fragile or easily marked surfaces, the rubber coating increases friction, softens impacts and prevents marking. An added advantage of pot magnets is that they are resistant to chipping or cracking following constant impact with a steel surface.

£230.72 £2.88 each
Higher Quantities? Contact us today for volume pricing.
Item in Stock  |  Same Day Dispatch Before 4pm (Mon - Fri)
£4.12
Product Code: F606R
Shape: Pot/Disc
Magnetic Face: 19mm dia
Thickness: 8mm
Grade: N42
Plating: Ni-Cu-Ni ( Nickel )
Material: NdFeB
Vertical Pull (Kg): 3.8
Slide Resistance (Kg): 1.9
Max Temp (degrees C): 80
Fixing: M5 Screw
  • 22mm diameter x 10mm tall with a M5 threaded hole
  • Each magnet can support 3.8kg vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness
  • Rubber-coated to increase friction and prevent marking other contact surfaces
  • M5 threaded hole for assembly

Neodymium pot magnets are made of a powerful Neodymium magnet sunken in to a steel shell meaning that the north pole is on the centre of the magnetic face and the south pole is on the outer edge around it. The steel pot increases the adhesive force of the magnets giving them an incredible hold for their size. Because these magnets have a rubber-coating they are ideal for using to attract fragile or easily marked surfaces, the rubber coating increases friction, softens impacts and prevents marking.  An added advantage of pot magnets is that they are resistant to chipping or cracking following constant impact with a steel surface.

Be the first to review 22mm dia x 10mm thick x M5 thread hole Rubber Coated Pot Magnet - 3.8kg Pull. Write a review ›