01777874520 Lines Open Monday - Friday 8.30am - 5px
(0)
£0.00

48mm dia x 11.5mm thick x 8mm c/bore N42 Neodymium Pot Magnet - 86kg Pull

code: D-F4MB48

Large, strong Neodymium (N42) pot magnets with a counter-bored hole on the magnetic face. Magnetism is concentrated on one face to provide the maximum holding force.

1. Select Pack Size
Pack Qty Pack Price Unit Price

1. Select Pack Size

48mm dia x 11.5mm thick x 8mm c/bore N42 Neodymium Pot Magnet - 86kg Pull ( Pack of 1 )
48mm dia x 11.5mm thick x 8mm c/bore N42 Neodymium Pot Magnet - 86kg Pull ( Pack of 1 )

Large, strong Neodymium (N42) pot magnets with a counter-bored hole on the magnetic face. Magnetism is concentrated on one face to provide the maximum holding force.

  • 48mm diameter x 11.5mm thick with a 8mm diameter counter-bored hole for fixing
  • Each magnet is only magnetic on the counter-bored face
  • Each magnet can support 86kg pull vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness
  • Coated with three layers of nickel, copper and nickel to reduce corrosion and provide a smooth finish
  • Can be fixed in place with 8mm diameter countersunk screws

These are the largest of our Neodymium counter-bored pot magnet range. Neodymium pot magnets are made of a powerful Neodymium magnet sunken in to a steel shell meaning that the north pole is on the centre of the magnetic face and the south pole is on the outer edge around it. The steel pot increases the adhesive force of the magnets giving them an incredible hold for their size. An added advantage of pot magnets is that they are resistant to chipping or cracking following constant impact with a steel surface. These magnets are counter-bored on the magnetic face and can be fixed to a surface with an 8mm screw, pot magnets are also available with countersinks and threaded studs. These magnets come with a safe-handling warning; because they are so powerful they can be dangerous if not handled carefully.

£18.12 £18.12 each

1. Select Pack Size

48mm dia x 11.5mm thick x 8mm c/bore N42 Neodymium Pot Magnet - 86kg Pull ( Pack of 10 )
48mm dia x 11.5mm thick x 8mm c/bore N42 Neodymium Pot Magnet - 86kg Pull ( Pack of 10 )

Large, strong Neodymium (N42) pot magnets with a counter-bored hole on the magnetic face. Magnetism is concentrated on one face to provide the maximum holding force.

  • Pack of 10
  • 48mm diameter x 11.5mm thick with a 8mm diameter counter-bored hole for fixing
  • Each magnet is only magnetic on the counter-bored face
  • Each magnet can support 86kg pull vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness
  • Coated with three layers of nickel, copper and nickel to reduce corrosion and provide a smooth finish
  • Can be fixed in place with 8mm diameter countersunk screws

These are the largest of our Neodymium counter-bored pot magnet range. Neodymium pot magnets are made of a powerful Neodymium magnet sunken in to a steel shell meaning that the north pole is on the centre of the magnetic face and the south pole is on the outer edge around it. The steel pot increases the adhesive force of the magnets giving them an incredible hold for their size. An added advantage of pot magnets is that they are resistant to chipping or cracking following constant impact with a steel surface. These magnets are counter-bored on the magnetic face and can be fixed to a surface with an 8mm screw, pot magnets are also available with countersinks and threaded studs. These magnets come with a safe-handling warning; because they are so powerful they can be dangerous if not handled carefully.

£169.44 £16.94 each

1. Select Pack Size

48mm dia x 11.5mm thick x 8mm c/bore N42 Neodymium Pot Magnet - 86kg Pull ( Pack of 20 )
48mm dia x 11.5mm thick x 8mm c/bore N42 Neodymium Pot Magnet - 86kg Pull ( Pack of 20 )

Large, strong Neodymium (N42) pot magnets with a counter-bored hole on the magnetic face. Magnetism is concentrated on one face to provide the maximum holding force.

  • Pack of 20
  • 48mm diameter x 11.5mm thick with a 8mm diameter counter-bored hole for fixing
  • Each magnet is only magnetic on the counter-bored face
  • Each magnet can support 86kg pull vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness
  • Coated with three layers of nickel, copper and nickel to reduce corrosion and provide a smooth finish
  • Can be fixed in place with 8mm diameter countersunk screws

These are the largest of our Neodymium counter-bored pot magnet range. Neodymium pot magnets are made of a powerful Neodymium magnet sunken in to a steel shell meaning that the north pole is on the centre of the magnetic face and the south pole is on the outer edge around it. The steel pot increases the adhesive force of the magnets giving them an incredible hold for their size. An added advantage of pot magnets is that they are resistant to chipping or cracking following constant impact with a steel surface. These magnets are counter-bored on the magnetic face and can be fixed to a surface with an 8mm screw, pot magnets are also available with countersinks and threaded studs. These magnets come with a safe-handling warning; because they are so powerful they can be dangerous if not handled carefully.

£318.27 £15.91 each

1. Select Pack Size

48mm dia x 11.5mm thick x 8mm c/bore N42 Neodymium Pot Magnet - 86kg Pull ( Pack of 40 )
48mm dia x 11.5mm thick x 8mm c/bore N42 Neodymium Pot Magnet - 86kg Pull ( Pack of 40 )

Large, strong Neodymium (N42) pot magnets with a counter-bored hole on the magnetic face. Magnetism is concentrated on one face to provide the maximum holding force.

  • Pack of 40
  • 48mm diameter x 11.5mm thick with a 8mm diameter counter-bored hole for fixing
  • Each magnet is only magnetic on the counter-bored face
  • Each magnet can support 86kg pull vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness
  • Coated with three layers of nickel, copper and nickel to reduce corrosion and provide a smooth finish
  • Can be fixed in place with 8mm diameter countersunk screws

These are the second to largest of our Neodymium counter-bored pot magnet range. Neodymium pot magnets are made of a powerful Neodymium magnet sunken in to a steel shell meaning that the north pole is on the centre of the magnetic face and the south pole is on the outer edge around it. The steel pot increases the adhesive force of the magnets giving them an incredible hold for their size. An added advantage of pot magnets is that they are resistant to chipping or cracking following constant impact with a steel surface. These magnets are counter-bored on the magnetic face and can be fixed to a surface with an 8mm screw, pot magnets are also available with countersinks and threaded studs. These magnets come with a safe-handling warning; because they are so powerful they can be dangerous if not handled carefully.

£574.74 £14.37 each
Higher Quantities? Contact us today for volume pricing.
Item in Stock  |  Same Day Dispatch Before 4pm (Mon - Fri)
£18.12
Product Code: F4MB48
Shape: Pot/Disc
Magnetic Face: 48mm dia
Thickness: 11.5mm
Grade: N42
Plating: Ni-Cu-Ni ( Nickel )
Material: NdFeB
Vertical Pull (Kg): 86
Slide Resistance (Kg): 17.2
Max Temp (degrees C): 80
Fixing: 8mm Cap Head Screw
  • 48mm diameter x 11.5mm thick with a 8mm diameter counter-bored hole for fixing
  • Each magnet is only magnetic on the counter-bored face
  • Each magnet can support 86kg pull vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness
  • Coated with three layers of nickel, copper and nickel to reduce corrosion and provide a smooth finish
  • Can be fixed in place with 8mm diameter countersunk screws

These are the largest of our Neodymium counter-bored pot magnet range. Neodymium pot magnets are made of a powerful Neodymium magnet sunken in to a steel shell meaning that the north pole is on the centre of the magnetic face and the south pole is on the outer edge around it. The steel pot increases the adhesive force of the magnets giving them an incredible hold for their size. An added advantage of pot magnets is that they are resistant to chipping or cracking following constant impact with a steel surface. These magnets are counter-bored on the magnetic face and can be fixed to a surface with an 8mm screw, pot magnets are also available with countersinks and threaded studs. These magnets come with a safe-handling warning; because they are so powerful they can be dangerous if not handled carefully.

Be the first to review 48mm dia x 11.5mm thick x 8mm c/bore N42 Neodymium Pot Magnet - 86kg Pull. Write a review ›