01777874520 Lines Open Monday - Friday 8.30am - 5px
(0)
£0.00

50mm dia x 10mm thick x 8.5mm hole Ferrite Pot Magnet - 15.8kg Pull

code: D-F4MG50

These medium-sized, ferrite (Y30BH) pot magnets are chrome plated with a plain through hole on the non-magnetic face. Magnetism is concentrated on one face to provide the maximum holding force.

1. Select Pack Size
Pack Qty Pack Price Unit Price

1. Select Pack Size

50mm dia x 10mm thick x 8.5mm hole Ferrite Pot Magnet  - 15.8kg Pull ( Pack of 1 )
50mm dia x 10mm thick x 8.5mm hole Ferrite Pot Magnet - 15.8kg Pull ( Pack of 1 )

These medium-sized, ferrite (Y30BH) pot magnets are chrome plated with a plain through hole on the non-magnetic face. Magnetism is concentrated on one face to provide the maximum holding force.

  • 50mm diameter x 10mm thick with a 8.5mm diameter plain through hole for a screw or bolt
  • Each magnet can support 15.8kg pull vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness
  • Chrome plated steel shell
  • Can be fixed in place with 8mm diameter cap head screws

Outstanding value for money, these ferrite pot magnets are made of a ferrite magnet sunken in to a steel shell meaning that the north pole is on the centre of the magnetic face and the south pole is on the outer edge around it. The steel pot increases the adhesive force of the magnets giving them a strong hold for their size. An added advantage of pot magnets is that they are resistant to chipping or cracking following constant impact with a steel surface. These magnets come with a safe-handling warning; because they are so powerful they can be dangerous if not handled carefully.

£1.95 £1.95 each

1. Select Pack Size

50mm dia x 10mm thick x 8.5mm hole Ferrite Pot Magnet  - 15.8kg Pull ( Pack of 10 )
50mm dia x 10mm thick x 8.5mm hole Ferrite Pot Magnet - 15.8kg Pull ( Pack of 10 )

These medium-sized, ferrite (Y30BH) pot magnets are chrome plated with a plain through hole on the non-magnetic face. Magnetism is concentrated on one face to provide the maximum holding force.

  • Pack of 10
  • 50mm diameter x 10mm thick with a 8.5mm diameter plain through hole for a screw or bolt
  • Each magnet can support 15.8kg pull vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness
  • Chrome plated steel shell
  • Can be fixed in place with 8mm diameter cap head screws

Outstanding value for money, these ferrite pot magnets are made of a ferrite magnet sunken in to a steel shell meaning that the north pole is on the centre of the magnetic face and the south pole is on the outer edge around it. The steel pot increases the adhesive force of the magnets giving them a strong hold for their size. An added advantage of pot magnets is that they are resistant to chipping or cracking following constant impact with a steel surface. These magnets come with a safe-handling warning; because they are so powerful they can be dangerous if not handled carefully.

£15.96 £1.60 each

1. Select Pack Size

50mm dia x 10mm thick x 8.5mm hole Ferrite Pot Magnet  - 15.8kg Pull ( Pack of 25 )
50mm dia x 10mm thick x 8.5mm hole Ferrite Pot Magnet - 15.8kg Pull ( Pack of 25 )

These medium-sized, ferrite (Y30BH) pot magnets are chrome plated with a plain through hole on the non-magnetic face. Magnetism is concentrated on one face to provide the maximum holding force.

  • Pack of 25
  • 50mm diameter x 10mm thick with a 8.5mm diameter plain through hole for a screw or bolt
  • Each magnet can support 15.8kg pull vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness
  • Chrome plated steel shell
  • Can be fixed in place with 8mm diameter cap head screws

Outstanding value for money, these ferrite pot magnets are made of a ferrite magnet sunken in to a steel shell meaning that the north pole is on the centre of the magnetic face and the south pole is on the outer edge around it. The steel pot increases the adhesive force of the magnets giving them a strong hold for their size. An added advantage of pot magnets is that they are resistant to chipping or cracking following constant impact with a steel surface. These magnets come with a safe-handling warning; because they are so powerful they can be dangerous if not handled carefully.

£33.48 £1.34 each

1. Select Pack Size

50mm dia x 10mm thick x 8.5mm hole Ferrite Pot Magnet  - 15.8kg Pull ( Pack of 50 )
50mm dia x 10mm thick x 8.5mm hole Ferrite Pot Magnet - 15.8kg Pull ( Pack of 50 )

These medium-sized, ferrite (Y30BH) pot magnets are chrome plated with a plain through hole on the non-magnetic face. Magnetism is concentrated on one face to provide the maximum holding force.

  • Pack of 50
  • 50mm diameter x 10mm thick with a 8.5mm diameter plain through hole for a screw or bolt
  • Each magnet can support 15.8kg pull vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness
  • Chrome plated steel shell
  • Can be fixed in place with 8mm diameter cap head screws

Outstanding value for money, these ferrite pot magnets are made of a ferrite magnet sunken in to a steel shell meaning that the north pole is on the centre of the magnetic face and the south pole is on the outer edge around it. The steel pot increases the adhesive force of the magnets giving them a strong hold for their size. An added advantage of pot magnets is that they are resistant to chipping or cracking following constant impact with a steel surface. These magnets come with a safe-handling warning; because they are so powerful they can be dangerous if not handled carefully.

£49.96 £1.00 each
Higher Quantities? Contact us today for volume pricing.
Item in Stock  |  Same Day Dispatch Before 4pm (Mon - Fri)
£1.95
Product Code: F4MG50
Shape: Pot
Magnetic Face: 50mm dia
Thickness: 10mm
Grade: Y30BH
Material: Ferrite
Performance (Gauss): 1400
Vertical Pull (Kg): 15.8
Slide Resistance (Kg): 3.1
Max Temp (degrees C): 180
Fixing: 6mm Cap Head Screw
  • 50mm diameter x 10mm thick with a 6.5mm diameter plain through hole for a screw or bolt
  • Each magnet can support 15.8kg pull vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness
  • Chrome plated steel shell
  • Can be fixed in place with 6mm diameter cap head screws

Outstanding value for money, these ferrite pot magnets are made of a ferrite magnet sunken in to a steel shell meaning that the north pole is on the centre of the magnetic face and the south pole is on the outer edge around it. The steel pot increases the adhesive force of the magnets giving them a strong hold for their size. An added advantage of pot magnets is that they are resistant to chipping or cracking following constant impact with a steel surface. These magnets come with a safe-handling warning; because they are so powerful they can be dangerous if not handled carefully.

5.00 out of 5 based on 1 rating.
Showing our 1 review for 50mm dia x 10mm thick x 8.5mm hole Ferrite Pot Magnet - 15.8kg Pull. Write a review ›
  • Currently 5/5 Stars.
5Reliable and do the job well

The Magnets were incorperated into safety equipment to ensure safe working during the assembly process. they hold the safety blocks inplace during assembly and stop paint damage to painted parts. They are reliable and do the job well.