Ideal for building WIND GENERATORS or WIND TURBINES!
A pack of 1 - Wind Turbine 70mm x (44-32)mm x 16mm thick N48 Neodymium Magnets. The NORTH pole is on one 70 x (44-32)mm trapezoid shape face and the SOUTH is on the opposite face. These Magnets are plated with 3 layers of protective coatings - Nickel + Copper + Nickel (Ni-Cu-Ni).
Product Code: WT70443216-1
Pack Size: 1
Shape: Trapezoid
Magnetic Face: 70 x (44-32)
Thickness: 16mm
Grade: N48
Plating: Ni-Cu-Ni ( Nickel )
Material: NdFeB ( Neodymium )
Performance (Gauss): 3300
Vertical Pull (Kg): 56
Slide Resistance (Kg): 11.2
Max Temp (degrees C): 80
Fixing: Araldite/Loctite
These magnets will have approximately 3300 Gauss on each face. Each magnet can support a steel weight of up to 56kg vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness to the magnet. Each magnet can also support up to 11.2kgs in a shear position before beginning to slide down a steel surface under the same conditions. These magnets can be fixed in place using Araldite/Loctite and have a maximum operating temperature of 80 degrees C.
Extreme Power Warning!
These magnets are dangerous! If your fingers are trapped between two of these magnets, they will be crushed! Please note that they should only be handled and used after a thorough risk assessment has been undertaken.



Follow us on Twitter & Facebook to hear about our latest offers & Promotions