DIY DAMAGE FREE MAGNETIC GALLERY WALL

If you’re looking to make your house a home, here at FIRST4MAGNETS we believe it’s the personal touches that add comfort and sentiment to your house.

Over the last 18 months redecorating, renovating, and improving your home has been a much-needed form of relief to combat being stuck inside, however if your new to the world or DIY or even rent your home you may feel stuck for options of how you can improve your home.

However, using magnetic products provides the perfect solution an easy, damage free, and interchangeable way to redecorate your home.

DIY & Home Décor expert, @thisenglishhome, has been able to create a stunning damage free gallery wall using our Magnetic Gallery Pack.

Using our pack removes the needs for nails, screws or drilling when hanging any artwork in your home, the magnetic gallery pack allows you to hang your pictures with ease and they can even be swapped and moved in a matter of seconds without any hassle.

To create your own damage free magnetic gallery wall there are only two simple steps, firstly, paint your wall or surface with our FerroPaint® then using our self-adhesive magnetic tape, stick this to whatever you want to hang and watch physics in action.

However, each stage has a bit more to it.

To learn more about our FerroPaint® and how exactly to apply it correctly you can watch our full tutorial now.

Making Frames Magnetic

Once you have painted your surface with three coats of FerroPaint® and have left it to dry for 24 hours you then need to ensure that whatever your hanging be it artwork, a mirror or pictures is now magnetic.

Any object with a flat surface can become magnetic using our self-adhesive magnetic tape, the amount of tape required depends on the weight of the object being hung.

Be sure to measure the length and width of each side the frame to ensure you have the correct amount of tape and also the correct width tape available, to ensure it is completely hidden when the frame is hanging.

.

.

Step One

Measure the length of the tape against your frame, marking a cut line with a pen or pencil.

.

.

Step Two

Cut the pieces accordingly. Standard scissors are sufficient in cutting our magnetic tapes and will allow for precise, clean cuts.

.

Step Three

Peel away the protective cover on the self-adhesive and prepare to stick. Don’t allow the adhesive to come into contact with other materials and try to manoeuvre the tape by holding it by its edges; this will avoid the tape sticking to your fingers.

.

.

Step Four

Apply the tape to the back of your frame and press down, allowing a minimum of 24 hours for the adhesive to cure.

.

Step Five

Once the magnetic tape has cured, the newly magnetic frames are ready for your wall. Simply place them on and off and re-arrange them until you are happy with their position, of course ensuring they are straight!

SHOP OUR MAGNETIC GALLERY PACK BELOW

If you have any questions or queries then be sure to get in touch with our team of experts who are available on 0845 519 4701 or sales@magnetexpert.com and are always happy to help.

Comments are closed here.