Using Magnets To Transport Warhammer Figures
Warhammer is played across the world and is extremely popular here in the UK, where the original Games Workshop was founded over 45 years ago. Here at FIRST4MAGNETS we have had numerous customers contact us showing how they have used magnets to improve their figures.
There are several ways in which our magnets can be used throughout a Warhammer collection, one of the creative and frequent ways we see our magnets utilised is when collectors magnetise their collection for transporting.
One customer, Des a Warhammer painter and player, has captured each step of adding magnets to his figures for different purposes.
However, no matter what reason you’re magnetising your collection Des has noted three key things to be careful of.
- Make sure you always check the magnets polarity.
- When using superglue, don’t place in an enclosed space for 24 hours, as this can create a white mist that will mark your mini.
- If you’re magnetising a squad, follow a sequence. Like the one below.
– Shoulder of first model then arm of first model
– Use the arm of the first model to check against the shoulder of the second model
– Use the shoulder of the first model with the arm of second model
– Follow this sequence for all models so that the polarity remains the same for every model in the unit.
Magnets for Transportation
One reason for the use of magnets in Warhammer is to help transport your collection, collectors can ensure their figures will be safe when travelling and can be quickly and easily packed without the need for unnecessary packaging.
This is achieved by adding a magnet to the base of each figure so that they will attract to the flexible magnetic sheet which can be used as the base in the box which the figures are carried in.
Des used our 10mm dia x 2mm thick N42 Neodymium Magnets (1.44kg Pull) and one of our FerroFlex sheets to magnetise his collection.
You can see Des’s step-by-step tutorial below:
Dry test your magnets, to ensure it fits and is the correct height to be flush with the bottom of the base. For the majority of Games Workshop bases, 10mm x 2mm works.
Having tested your magnet, then place a small amount of superglue onto the underside of the base.
Then place your magnet onto the superglue and press firmly until the magnet is set.
Be sure to leave the entire side to dry for 24 hours, as when using superglue in an enclosed space a white mist can be created and mark your figure.
After the side has dried, you can then place the mini into the box with the flexible magnetic sheet base.
Turn the entire box upside down and smile.