Category

How Are Magnets Made

30/06/2021

How Are Samarium Cobalt Magnets Made?

Samarium cobalt magnets are widely produced and the permanent magnets are primarily made up of samarium and cobalt but some grades will also contain varying small amounts of iron (Fe), copper (Cu), hafnium (Hf), zirconium (Zr) and praseodymium (Pr). A number of common manufacturing processes can be used to produce samarium cobalt magnets but typically, a method of reduction and melting is used followed by a process of bonding or sintering the raw material to form the magnet. Bonded Samarium Cobalt Magnets . . Step 1 – Heated Firstly, the... Read More

29/06/2021

How are Ferrite Magnets made?

The process for manufacturing ferrite magnets, also known as ceramic magnets, is not as costly or sophisticated as producing rare-earth neodymium magnets. The chemical compound of ferrite magnets is SrO-6 (Fe2O3), a combination of strontium carbonate and iron oxide. Due to their chemical make-up it means they are extremely resistant to demagnetisation through heat and corrosion, although, like neodymium magnets they are very hard and brittle. Step 1 – Calcination The production of ferrite magnets begins with calcining a finely powdered mixture of iron oxide and strontium carbonate to produce... Read More

28/06/2021

How are Neodymium magnets made?

Neodymium magnets are technological marvels and the process for creating them is sophisticated and delicate. The main ingredients of a neodymium magnet are neodymium itself, iron, and boron; the chemical compound known as NdFeb. The exact ingredients depend on the grade or strength of magnet being produced. However, the production process for different strength magnets sees the same size different stages required to produce a neodymium magnet. . Step 1 – The Mix Firstly, all the elements to make the chosen grade of magnet are placed into a vacuum induction... Read More

25/06/2021

How are Sintered Alnico Magnets made?

Alnico magnets have now been manufactured for over 100 years, in which time the process has not drastically changed. Alnico magnets are permanent magnets that are primarily made up of a combination of aluminium, nickel and cobalt but can also include copper, iron and titanium. In this blog we will be explaining the manufacturing process of Sintered Alnico magnets, smaller Alnico magnets, weighing grams rather than kilograms are usually created using the sintering process. Sintering is generally the process used when a high volume of magnets are required. . . Step 1... Read More

24/06/2021

How are Cast Alnico magnets made?

Alnico magnets have now been manufactured for over 100 years, in which time the process has not drastically changed. Alnico magnets are permanent magnets that are primarily made up of a combination of aluminium, nickel and cobalt but can also include copper, iron and titanium. In this blog we will be explaining the manufacturing process of Cast Alnico, a larger Alnico magnet weighing tens of kilograms which will nearly always be produced by casting. Step 1 – Foundry Furnace Each grade of Alnico has a special recipe in terms of... Read More