Super Strong
Next Day Delivery Available to the UK
A UK Leading Magnet Supplier
Standard Delivery From £1.45 + VAT
100% Secure Online Ordering

40mm dia x 8mm thick x 6mm c/sink N42 Neodymium Pot Magnet - 64kg Pull

Large, strong neodymium (N42) pot magnets with a countersunk hole on the magnetic face. Magnetism is concentrated on one face to provide the maximum holding force.

Higher Quantities? Contact us today for volume pricing.

Loading...
Item in Stock | Same day dispatch when ordered before 4:30pm (Mon - Fri)
  • £9.95
Product Code: F4MA40
Shape: Pot/Disc
Magnetic Face: 40mm dia
Thickness: 8mm
Grade: N42
Plating: Ni-Cu-Ni ( Nickel )
Material: NdFeB
Vertical Pull (Kg): 64
Slide Resistance (Kg): 12.9
Max Temp (degrees C): 80
Fixing: 6mm c/s screw
  • 40mm diameter x 8mm thick with a 6mm diameter countersunk hole for fixing
  • Each magnet is only magnetic on the countersunk face
  • +/-0.1mm tolerance
  • Each magnet can support 64kg pull vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness
  • Can be fixed in place with 6mm diameter countersunk screws

These large neodymium pot magnets are made of a powerful neodymium magnet sunken in to a steel shell meaning that the north pole is on the centre of the magnetic face and the south pole is on the outer edge around it. The steel pot increases the adhesive force of the magnets giving them an incredible hold for their size. An added advantage of pot magnets is that they are resistant to chipping or cracking following constant impact with a steel surface. These magnets are countersunk on the magnetic face and can be fixed in place with a 6mm countersunk screw. These magnets come with a safe-handling warning; because they are so powerful they can be dangerous if not handled carefully.

Showing our 1 review for 40mm dia x 8mm thick x 6mm c/sink N42 Neodymium Pot Magnet - 64kg Pull. Write a review ›
Review Summary - 5 out of 5 based on 1 rating.
June 25, 2014 | Ross
Super Strong

This magnet is much stronger than i expected! Good quality and has a very useful countersunk hole. I would suggest putting a nut and bolt through the hole so you can pull it off if it gets stuck.
Highly recommend this magnet, will be purchasing from here again.
Ross

Magnet Expert Ltd
Top