N42 Neodymium Glue In Pot Magnet - 5/8 in. dia x 3/16 in. thick - 23.37lbs Pull
*Measurements have been rounded to the nearest fraction inch - please check the product description for specific measurements.*
These N42 Neodymium pot magnets are glued into fixtures when a screw is not a possible fixing option.
- 16mm dia x 5mm thick.
- 0.63 in. dia. x 0.2 in. thick.
- Each magnet can support 10.6kg (23.37lbs) vertically from the magnetic face when in flush contact with a mild steel surface.
- Glue required for application.
- N42 Grade Neodymium.
- Each magnet is coated with three layers of nickel, copper and nickel to improve corrosion resistance and provide a smooth and clean finish.
These Neodymium pot magnets are glued into fixtures when a screw is not a possible fixing option. The adhesive force is greater than same size countersunk pot magnets due to their larger contact surface. An added advantage of pot magnets is that they are resistant to chipping and cracking following constant impact with a steel surface.
Adhesive is not supplied with magnets, our Loctite Super Glue adhesives will be suitbale to ensure a secure fixing.
What's Popular
Please fill out the following form to Ask a Question about this product:
Please fill out the following form to Tell a Friend about this product: