Ceramic Stainless Steel Channel Magnet - 1 in. x 29/32 in. x 1/4 in. thick x 1/8 in. hole - 13.45lbs Pull

• 26mm x 23mm x 6.3mm with 3mm hole.
• 1.02 in. x 0.91 in. x 0.25 in. with 0.12 in. hole.
• Rivet Fixing for 2mm (0.08 in.) Screw.
• Innovative rectangular design with nickel casing which greatly increases performance.
• The magnet's north pole is on the centre of the magnet's face with the south pole on the outer edge meaning both poles are on the same face.
• 13.45lbs maximum pull from the magnetic surface when in flush contact with a mild steel surface of equal thickness to the magnet.
• Resistant to corrosion so no extra coating required.

These channel magnets offer excellent value with a maximum pull strength of 6.1kg (13.45lbs). The innovative channel design with stainless steel casing greatly increases performance. Each magnet can be screwed into place using a 3mm (0.12 in.) screw and has a maximum operating temperature of 180 degrees Celsius. They are commonly used around the home and for holding machine parts in place.