Neodymium 'Knock In' Magnetic Catch - 19/32 in. dia x 3/8 in. thick - 2.87lbs Pull
*Measurements have been rounded to the nearest fraction inch - please check the product description for specific measurements.*
19/32" dia x 25/64" thick Knock In Magnetic Catches are designed to be recessed into wooden surfaces to give you a magnetic closure.
- 1/10/20/40 pairs of Knock In Magnets.
- 15mm diameter x 10mm thick.
- 0.59 in. diameter x 0.39 in. thick.
- 2.87lbs pull strength per magnet.
- Neodymium magnet encased in a white, plastic casing.
Knock in magnetic catches are designed to fit within drilled holes from wooden furniture, giving you a magnetic point to attract to and an efficient magnetic closure. They offer simple and quick instillation for effective magnetic closures in draws, cupboards and gates.
To apply, drill out a 14mm (0.55 in.) wide by 10mm (0.39 in.) deep hole from your wooden furniture. Once you have 2 opposing holes, ease a knock in magnet into each hole, gently knocking it with a mallet if required. When recessing the magnets, ensure opposing magnetic poles are facing each other so that the magnets will attract. Check the magnets are secure by testing the application.
Different woods may require an adhesive to help hold the magnets in place.
What's Popular
Please fill out the following form to Ask a Question about this product:
Please fill out the following form to Tell a Friend about this product: