MagFlex® 300mm Wide Flexible Magnetic Sheet - 3M Self Adhesive

• Supplied as one 5 metre length.
• 300mm wide x 0.85mm thick and 5 metres long.
• Magnetic on one side only with a striped north-south magnetic field to give a secure grip.
• Convenient super-strong self-adhesive on the non-magnetic side.
• Each MagFlex® magnetic sheet has a pulling force of 40g/cm².
• Made from non-toxic, environmentally friendly EN71 material.

Because our self-adhesive, flexible magnetic sheets are easily cut to size with scissors it makes their creative uses endless. Whether you are a craft enthusiast, want to create your own signs or make your artwork or photos magnetic you will find our MagFlex® magnetic sheets really useful. Because they are much less powerful than 'hard' Neodymium magnets they are much easier to handle and work with. These sheets are not suitable for sticking 'hard' permanent magnets too as the strong magnetic field will realign the magnetic particles in the sheet, significantly weakening its own magnetic field. If you are looking for a flexible sheet to create a magnetic surface for 'hard' magnets, then you should use our ferrous sheet and tapes.

These MagFlex® sheets utilise a firm acrylic pressure-sensitive adhesive that substantially increases in bond strength with natural aging. While the initial touch bond strength is enough to keep the grip secure, to ensure the adhesive can withstand the pull strength we recommend allowing between 24 to 32 hours for the adhesive to fully cure.

• Supplied as six 5 metre lengths.
• 300mm wide x 0.85mm thick.
• Magnetic on one side only with a striped north-south magnetic field to give a secure grip.
• Convenient super-strong self-adhesive on the non-magnetic side.
• Each MagFlex® magnetic sheet has a pulling force of 40g/cm².
• Made from non-toxic, environmentally friendly EN71 material.

Because our self-adhesive, flexible magnetic sheets are easily cut to size with scissors it makes their creative uses endless. Whether you are a craft enthusiast, want to create your own signs or make your artwork or photos magnetic you will find our MagFlex® magnetic sheets really useful. Because they are much less powerful than 'hard' Neodymium magnets they are much easier to handle and work with. These sheets are not suitable for sticking 'hard' permanent magnets too as the strong magnetic field will realign the magnetic particles in the sheet, significantly weakening its own magnetic field. If you are looking for a flexible sheet to create a magnetic surface for 'hard' magnets, then you should use our ferrous sheet and tapes.

These MagFlex® sheets utilise a firm acrylic pressure-sensitive adhesive that substantially increases in bond strength with natural aging. While the initial touch bond strength is enough to keep the grip secure, to ensure the adhesive can withstand the pull strength we recommend allowing between 24 to 32 hours for the adhesive to fully cure.