(0)
Items
01777874520 Lines Open Monday - Friday 8.30am - 5px
Slither1 Slither2

50 x 50 x 25mm thick N42 Neodymium Magnet with 8.2mm dia c/sunk hole - 95kg Pull (North/South)

code: D-F335NS

High-performance, Neodymium (N42) square magnet with a countersunk hole on either side. Compact but incredibly strong.

1. Select Pack Size
Pack Qty Pack Price Unit Price

1. Select Pack Size

50 x 50 x 25mm thick N42 Neodymium Magnet c/w 8.2mm dia countersunk hole (North/South) - 95kg Pull (Pack of 1)
50 x 50 x 25mm thick N42 Neodymium Magnet c/w 8.2mm dia countersunk hole (North/South) - 95kg Pull (Pack of 1)
  • 50mm x 50mm x 25mm thick with a 8.2mm diameter countersunk hole on either side for fixing.
  • N42 Grade Neodymium.
  • Super-strong 95kg Pull.
  • Each magnet is countersunk on either side, the north pole of each magnet is identified by a dimple on the surface.
  • Coated with three layers of nickel, copper and nickel to reduce corrosion and provide a smooth and clean finish.
  • Can be fixed in place with a countersink screw.

This magnet is little larger than a block of post-it notes but incredibly produces an astonishing pull of 95kg. A single F335NS is so strong that it will wipe data from hard drives and is commonly used in large scale engineering projects such as wind turbines. Each magnet has a triple coating of nickel, copper and nickel again to reduce corrosion. These magnets come with the convenience of a countersunk hole, meaning they can be screwed into place. Countersunk magnets with opposite facing poles can be used to attract two surfaces, or two opposing countersunk magnets with the same poles facing can be used to create a damping, shock absorbing or repelling effect. This is one of the strongest countersunk magnets available on the market.

Please note, these magnets should only be handled by people who are used to handling strong magnets and once a thorough risk assessment has been undertaken as they will easily crush trapped fingers causing serious injury.

£52.50 £52.50 each

1. Select Pack Size

50 x 50 x 25mm thick N42 Neodymium Magnet c/w 8.2mm dia countersunk hole (North/South) - 95kg Pull (Pack of 4)
50 x 50 x 25mm thick N42 Neodymium Magnet c/w 8.2mm dia countersunk hole (North/South) - 95kg Pull (Pack of 4)
  • 50mm x 50mm x 25mm thick with a 8.2mm diameter countersunk hole on either side for fixing.
  • N42 Grade Neodymium.
  • Super-strong 95kg Pull.
  • Each magnet is countersunk on either side, the north pole of each magnet is identified by a dimple on the surface.
  • Coated with three layers of nickel, copper and nickel to reduce corrosion and provide a smooth and clean finish.
  • Can be fixed in place with a countersink screw.

This magnet is little larger than a block of post-it notes but incredibly produces an astonishing pull of 95kg. A single F335NS is so strong that it will wipe data from hard drives and is commonly used in large scale engineering projects such as wind turbines. Each magnet has a triple coating of nickel, copper and nickel again to reduce corrosion. These magnets come with the convenience of a countersunk hole, meaning they can be screwed into place. Countersunk magnets with opposite facing poles can be used to attract two surfaces, or two opposing countersunk magnets with the same poles facing can be used to create a damping, shock absorbing or repelling effect. This is one of the strongest countersunk magnets available on the market.

Please note, these magnets should only be handled by people who are used to handling strong magnets and once a thorough risk assessment has been undertaken as they will easily crush trapped fingers causing serious injury.

£168.41 £42.10 each

1. Select Pack Size

50 x 50 x 25mm thick N42 Neodymium Magnet c/w 8.2mm dia countersunk hole (North/South) - 95kg Pull (Pack of 20)
50 x 50 x 25mm thick N42 Neodymium Magnet c/w 8.2mm dia countersunk hole (North/South) - 95kg Pull (Pack of 20)
  • 50mm x 50mm x 25mm thick with a 8.2mm diameter countersunk hole on either side for fixing.
  • N42 Grade Neodymium.
  • Super-strong 95kg Pull.
  • Each magnet is countersunk on either side, the north pole of each magnet is identified by a dimple on the surface.
  • Coated with three layers of nickel, copper and nickel to reduce corrosion and provide a smooth and clean finish.
  • Can be fixed in place with a countersink screw.

This magnet is little larger than a block of post-it notes but incredibly produces an astonishing pull of 95kg. A single F335NS is so strong that it will wipe data from hard drives and is commonly used in large scale engineering projects such as wind turbines. Each magnet has a triple coating of nickel, copper and nickel again to reduce corrosion. These magnets come with the convenience of a countersunk hole, meaning they can be screwed into place. Countersunk magnets with opposite facing poles can be used to attract two surfaces, or two opposing countersunk magnets with the same poles facing can be used to create a damping, shock absorbing or repelling effect. This is one of the strongest countersunk magnets available on the market.

Please note, these magnets should only be handled by people who are used to handling strong magnets and once a thorough risk assessment has been undertaken as they will easily crush trapped fingers causing serious injury.

£708.40 £35.42 each

1. Select Pack Size

50 x 50 x 25mm thick N42 Neodymium Magnet c/w 8.2mm dia countersunk hole (North/South) - 95kg Pull (Pack of 40)
50 x 50 x 25mm thick N42 Neodymium Magnet c/w 8.2mm dia countersunk hole (North/South) - 95kg Pull (Pack of 40)
  • 50mm x 50mm x 25mm thick with a 8.2mm diameter countersunk hole on either side for fixing.
  • N42 Grade Neodymium.
  • Super-strong 95kg Pull.
  • Each magnet is countersunk on either side, the north pole of each magnet is identified by a dimple on the surface.
  • Coated with three layers of nickel, copper and nickel to reduce corrosion and provide a smooth and clean finish.
  • Can be fixed in place with a countersink screw.

This magnet is little larger than a block of post-it notes but incredibly produces an astonishing pull of 95kg. A single F335NS is so strong that it will wipe data from hard drives and is commonly used in large scale engineering projects such as wind turbines. Each magnet has a triple coating of nickel, copper and nickel again to reduce corrosion. These magnets come with the convenience of a countersunk hole, meaning they can be screwed into place. Countersunk magnets with opposite facing poles can be used to attract two surfaces, or two opposing countersunk magnets with the same poles facing can be used to create a damping, shock absorbing or repelling effect. This is one of the strongest countersunk magnets available on the market.

Please note, these magnets should only be handled by people who are used to handling strong magnets and once a thorough risk assessment has been undertaken as they will easily crush trapped fingers causing serious injury.

£1,238.58 £30.96 each
Higher Quantities? Contact us today for volume pricing.
Item in Stock  |  Same day dispatch when ordered before 4pm (Mon - Fri)
£52.50
Order in the next 5 hrs 27 mins 19 secs for Guaranteed Delivery on Wednesday 24th, October.
*UK Mainland Only - Choose Next Working Day Delivery at Checkout.
Product Code: F335NS
Shape: Square
Magnetic Face: 50 x 50
Thickness: 25mm
Grade: N42
Kg Pull: 95
Plating: Ni-Cu-Ni (Nickel)
Material: NdFeB
Performace (Gauss): 4,900
Vertical Pull: 19Kg
Max Temp (degrees C): 80
Fixing: 8mm Screw
  • A pack of 1, 4, 20 or 40 magnets
  • 50mm x 50mm x 25mm thick with a 8.2mm diameter countersunk hole on either side for fixing
  • N42 Grade Neodymium
  • Super-strong 95kg Pull
  • Each magnet is countersunk on either side, the north pole of each magnet is identified by a dimple on the surface
  • Coated with three layers of nickel, copper and nickel to reduce corrosion and provide a smooth and clean finish
  • Can be fixed in place with a countersink screw

This magnet is little larger than a block of post-it notes but incredibly produces an astonishing pull of 95kg. A single F335NS is so strong that it will wipe data from hard drives and is commonly used in large scale engineering projects such as wind turbines. Each magnet has a triple coating of nickel, copper and nickel again to reduce corrosion. These magnets come with the convenience of a countersunk hole, meaning they can be screwed into place. Countersunk magnets with opposite facing poles can be used to attract two surfaces, or two opposing countersunk magnets with the same poles facing can be used to create a damping, shock absorbing or repelling effect. This is one of the strongest countersunk magnets available on the market.

Please note, these magnets should only be handled by people who are used to handling strong magnets and once a thorough risk assessment has been undertaken as they will easily crush trapped fingers causing serious injury.

Be the first to review 50 x 50 x 25mm thick N42 Neodymium Magnet with 8.2mm dia c/sunk hole - 95kg Pull (North/South). Write a review ›