Y10 Ceramic Disc Magnet with Self Adhesive Foam - 13/16 in. dia x 1/8 in. thick - 1.32lbs Pull
*Measurements have been rounded to the nearest fraction inch - please check the product description for specific measurements.*
Ceramic (Ferrite) (Y10) disc magnets, magnetized on one side only with a layer of self-adhesive foam on the other side. Making them ideal for fridge magnets.
Each magnet is magnetised with a striped magnetic north/south magnetic field providing a secure grip. Due to the strength of Ceramic (Ferrite), we recommend allowing between 24 to 32 hours for the adhesive to cure.
Please fill out the following form to Ask a Question about this product:
Please fill out the following form to Tell a Friend about this product:
- 20mm diameter x 3mm thick.
- 0.79 in. diameter x 0.12 in. thick.
- Standard foam self adhesive.
- Each magnet can support a steel weight of up to 0.6kg (1.32lbs) vertically from the magnetic face when in flush contact with a mild steel surface.
- Each magnet will support approximately 120g (0.26lbs) against the surface of a fridge.
- Resistant to demagnetisation and corrosion without any extra coating.
Also known as ceramic magnets, ferrite magnets offer excellent value for money when pull strength is not the most important factor. These magnets are perfect for making fridge magnets out of your own photos or decorative items as they are only magnetised on one side with a layer of self-adhesive foam on the other. Simply attach the item you want to turn into a fridge magnet on to the self-adhesive side and you have an instant fridge magnet.
These Ferrite magnets utilise a firm acrylic pressure-sensitive adhesive that substantially increases in bond strength with natural aging. While the initial touch bond strength is enough to support the weight of the magnet, to ensure the adhesive can withstand the magnets pull strength we recommend allowing between 24 to 32 hours for the adhesive to fully cure.
What's Popular