Electromagnets are also commonly known as solenoids and we have a wide range available to suit any application, with sizes ranging from 12mm to 203mm, and pull strengths from 1.8kg to 907kg.
These energize to hold electromagnets, as their name suggests, become magnetized when an electric current is applied.
This provides a secure magnetic hold leading to efficient performance for many automated lifting applications. This magnetic field is removed once the power is switched off.
All of our energized to-hold electromagnets are supplied pre-wired for attaching to a power source (not supplied).
Energize to release or electro-permanent magnets are always “on” when there is no current applied. When an electric current is applied, the electromagnet instantly turns off.
This range is available in a circular shape and is available in diameter from 17mm to 100mm, with pull strengths from 2kg to 150kg. These electromagnets have mounting holes from 3mm to 8mm to suit your assembly requirements.
Circular electromagnets provide great versatility for working on a variety of surface sizes. These magnets are connected through either a 6VDC or 24VDC current.
If you require a custom size or strength energise to hold or release an electromagnet, we can custom manufacture to suit your requirements.
For any further information regarding custom manufacturing, contact our sales team today to discuss your specifications.
800-917-0841| sales@first4magnets.com
The above diagram shows a basic construction of an electromagnet. A wire is wound into a coil around an iron core.
As you can see from the diagram above, when the electromagnet is connected to a power source, the circuit closes and a magnetic field is produced.
The diagram above demonstrates when there is no current applied there is a magnetic field.
Once a current is applied, it stops the external magnetic field and creates an internal closed circuit. This is why the lines of magnetism are confined to within the edges on the second diagram. The electromagnet is now turned off.
Electromagnets provide considerable clamping force to ensure secure holding whilst in operation. The strong nickel plating aids with maintaining performance in demanding applications without being damaged.
Electromagnets are versatile in that they can be easily turned on and off due to the requirement of a current needing to be applied for the electromagnet to operate. This versatility increases energy efficiency as handling times are significantly reduced.
As electromagnets perform through a current, they can be operated remotely ensuring maximum safety and reducing operational risk.
With multiple mounting sizes available, electromagnets can easily be used with many assembly arrangements for a wide range of applications.
The electromagnet is permanently magnetised, electricity is only required to release/turn the electromagnet off.
Energise-to-release magnets are magnetised until a power source is applied, they have an extremely secure hold with the maximum pull being 150kg!
Energise to Release Electromagnets are easy to operate, and can be easily turned off when connected to a power source. If you are then looking to turn the Electromagnet back on, simply turn it off or remove the power source.
FIRST4MAGNETS does not accept liability for damage caused by the improper handling of these magnets. These magnets generate a very strong magnetic field when connected to a live power supply, and if handled incorrectly can be dangerous.
Always ensure that the power supply is turned off when handling these magnets. When energized, these magnets will attract with a surprising amount of power to a steel surface.
Electromagnets are not toys and are not suitable for children. Do not allow children to handle these magnets.
These magnets require wiring to a 12VDC or 24VDC power supply in order to generate a magnetic field and should only be installed by a competent person. If the magnets are incorrectly installed, there is a risk of electrocution, which could be fatal. Before installing the enclosed electromagnet always ensure that the power source is turned off. Once installed, always test the magnet in a safe environment before using it in its intended application. The enclosed electromagnet is an energise-to-hold magnet and only generates a magnetic field when a live current is applied. If there is any interruption to the power supply the magnet will release from the surface it is attracted to.
Keep operational magnets away from heart pacemakers. The operation of a heart pacemaker will be affected by the close proximity of a magnet. Magnetic fields can set a pacemaker working in a way that is not suitable for the user and that might affect their health.