Super-strong Neodymium pot magnet with an M12 eyebolt fitting on the 4 9/16" face and an M10 eyebolt fitting in the side.
Higher Quantities? Contact us today for volume pricing.
|Magnetic Face (dia mm):||116|
|Product Dimensions (mm):||116 x 32|
|Pull Strength (kg):||400|
|Slide Resistance (kg):||80|
|Eyebolts:||M12 + M10|
|Max Temp (degrees C):||80|
|Rope Length (metres):||10|
|Rope Diameter (mm):||4|
|Rope Strength (kg)||Up to 420|
The 4 17/30'' dia by 1 20/77'' thick N42 Neodymium Pot Magnet with 1x M12 and 1x M10 Eyebolts is incredibly strong for its size, due to its NdFeB properties. The magnet's maximum pull performance (881.85lbs) can be achieved when the magnet is applied in a vertical position against a mild steel surface of equal thickness.
An added advantage of the pot magnet is that it is recessed in the steel shell, which reduces potential impacts and therefore chipping.
For added versatility, this magnet accommodates not just 1, but 2 threaded eyebolts. They can be applied and removed as required on both 4 17/30'' dia faces, with 1 threaded hole in the side of the magnet too. The eyebolt's shape allows for ropes and cables to be attached to the magnet with ease, making it a strong and efficient performer in lifting, holding and retrieval applications.
The magnet is accompanied by a 32.8 Feet long polyester rope in red which can hold a weight of 926.1lbs. The rope and magnet combination is used in recovery and retrieval, particularly magnet fishing. We recommend the rope is tied to the magnet with a Tautline Hitch knot so that when the magnet attracts to a ferrous material, the rope doesn't come loose when retracted.
These magnets come with a safe-handling warning; because they are so powerful they can be dangerous if not handled carefully.