N42 Neodymium Clamping Magnet with M8 Eyebolt and 10m Rope Rope - 48mm dia - 209.47lbs Pull

• Magnet is 48mm diameter x 46mm high
• +/-0.1mm tolerance
• The internal diameter of the eyebolt is 19.5mm and it is 34mm from base to top
• Each magnet can support a steel weight of up to 209.47lbs vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness and 39.69lbs in a shear position
• Removable eyebolt with M8 thread
• Coated with three layers of nickel, copper and nickel to reduce corrosion and provide a smooth finish
• Rope is red in colour, 32.81 Feet long with a 4mm diameter and has a breaking strength of 926.1lbs

These large clamping magnets provide an astonishing 209.47lbs clamping force in a vertical position. The neodymium magnets are sunken in to a steel shell meaning that the north pole is on the centre of the magnetic face and the south pole is on the outer edge around it. The steel pot increases the clamping force of the magnets giving them an incredible hold for their size. An added advantage of these magnets is that they are resistant to chipping or cracking following constant impact with a steel surface. The eyebolt is bolted right through the countersunk hole in these magnets to provide a secure anchor point.

The magnet is accompanied by a 10m long polyester rope which can hold a hefty weight of 926.1lbs. This combination of rope and magnet is used in recovery and retrieval, especially magnet fishing. We recommend the rope is tied to the magnet with a Tautline Hitch knot so that when the magnet attracts to a ferrous material, the rope doesn't come loose when pulled back.

For everything you need to know about magnet fishing, our team have produced the ultimate guide that covers the perfect location, potential treasures, recommended knots and our wide range of magnet fishing kits. View and download our.