Ceramic Pot Magnet - 1-7/8 in. dia x 3/8 in. thick x 5/16 in. hole - 34.84lbs Pull

*Measurements have been rounded to the nearest fraction inch - please check the product description for specific measurements.*

These medium-sized, Ceramic (Ferrite) (Y30BH) pot magnets are chrome plated with a plain through hole on the non-magnetic face. Magnetism is concentrated on one face to provide the maximum holding force.

Pack 1 quantity: 1 Pot magnet

Higher Quantities? Contact us today for volume pricing.

Item in Stock | Same day dispatch when ordered before 11:30am EST (Mon - Fri)

$3.21
|
|

Add To Compare

Technical Specification
Product Description
Rating:
(1)

Product Code:	F4MG50
Shape:	Pot
Magnetic Face:	1 31/32" diameter
Thickness:	25/64"
Grade:	Y30BH
Material:	Ceramic
Performance (Gauss):	1400
Vertical Pull:	34.83lbs
Slide Resistance:	6.83lbs
Max Temp:	356°F
Fixing:	15/64"

50mm diameter x 10mm thick with a 8.5mm diameter plain through hole for a screw or bolt.
1.97 in. diameter x 0.39 in. thick with a 0.34 in. diameter plain through hole for a screw or bolt.
Each magnet can support 15.8kg (34.84lbs) pull vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness.
Chrome plated steel shell.
Can be fixed in place with 6mm diameter cap head screws.

Outstanding value for money, these ferrite pot magnets are made of a ferrite magnet sunken in to a steel shell meaning that the north pole is on the centre of the magnetic face and the south pole is on the outer edge around it. The steel pot increases the adhesive force of the magnets giving them a strong hold for their size. An added advantage of pot magnets is that they are resistant to chipping or cracking following constant impact with a steel surface. These magnets come with a safe-handling warning; because they are so powerful they can be dangerous if not handled carefully.

Showing our 1 review for Ceramic Pot Magnet - 1-7/8 in. dia x 3/8 in. thick x 5/16 in. hole - 34.84lbs Pull. Write a review ›

Review Summary - 5 out of 5 based on 1 rating.

July 31, 2013 | Brian

Reliable and do the job well

The Magnets were incorperated into safety equipment to ensure safe working during the assembly process. they hold the safety blocks inplace during assembly and stop paint damage to painted parts. They are reliable and do the job well.

Magnet Expert Ltd