N42 Neodymium Pot Magnet with M4 Thread - 5/8 in. dia x 1/2 in. tall - 21.38lbs Pull

*Measurements have been rounded to the nearest fraction inch - please check the product description for specific measurements.*

Small and shallow but very strong, these high-performance Neodymium (N42) pot magnets have a threaded collar on the non-magnetic face. Magnetism is concentrated on one face to provide the maximum holding force.

Pack quantity 1: 1 Pot magnet

Higher Quantities? Contact us today for volume pricing.

Item in Stock | Same day dispatch when ordered before 11:30am EST (Mon - Fri)

$3.59
|
|

Add To Compare

Technical Specification
Product Description
Rating:
(0)

Product Code:	F4MH16
Shape:	Pot
Magnetic Face:	16mm dia
Thickness:	13mm
Grade:	N42
Plating:	Ni-Cu-Ni ( Nickel )
Material:	NdFeB
Vertical Pull (Kg):	9.7
Slide Resistance (Kg):	1.94
Max Temp (degrees C):	80
Fixing:	M4 Machine Screw

16mm diameter x 13mm tall with a M4 7mm deep threaded collar.
0.63 in. diameter x 0.51 in. tall with a M4 0.28 in. deep threaded collar.
+/-0.1mm (0.0004 in.) tolerance.
Each magnet can support 9.7kg (21.39lbs) vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness.
Coated with three layers of nickel, copper and nickel to reduce corrosion and provide a smooth finish.
M4 threaded collar for assembly.

Neodymium pot magnets are made of a powerful Neodymium magnet sunken in to a steel shell meaning that the north pole is on the centre of the magnetic face and the south pole is on the outer edge around it. The steel pot increases the adhesive force of the magnets giving them an incredible hold for their size. An added advantage of pot magnets is that they are resistant to chipping or cracking following constant impact with a steel surface.

Be the first to review N42 Neodymium Pot Magnet with M4 Thread - 5/8 in. dia x 1/2 in. tall - 21.38lbs Pull. Write a review ›