Nickel Plated Mild Steel Disc with 3M Self-Adhesive - 3/8 in. dia x 1/32 in. thick
*Measurements have been rounded to the nearest fraction inch - please check the product description for specific measurements.*
These small steel discs are not magnets, but instead are used as a striker plates which magnets can then attract to. With premium 3M self-adhesive on one side, they are perfect for arts and crafts and for galleries and exhibitions.
Please fill out the following form to Ask a Question about this product:
Please fill out the following form to Tell a Friend about this product:
- 10mm diameter x 1mm thick.
- 0.39 in. diameter x 0.04 in. thick.
- Premium 3M self-adhesive with peel away backing on one side.
- Will stick to most hard, flat surfaces to create a magnetic surface.
- Nickel plated to provide resistance against corrosion.
If you are looking to use a magnet then you need a steel surface, or another magnet, to attract to. A magnet will attract to a steel surface in direct contact with equal strength as a magnet to magnet arrangement, therefore, self-adhesive steel discs can sometimes provide a more cost-effective solution. However, it is important to remember that if there is a gap between the two, then a magnet to magnet attraction will be stronger.
These small steel discs are supplied with convenient, strong 3M⢠self-adhesive on one side which means they can be stuck to almost any hard, flat surface to create a magnetic surface. They are an essential part of any crafting tool kit and are often used by galleries to hang artwork. What’s more, because they are just 1mm (0.04 in.) thick they are often used to create a magnetic closure on printed products, such as stationery.
What's Popular