How To Apply Magnetic Wall Pins – Step by Step Guide

Magnetic wall pins provide the perfect solution for storing your tools and organising your shed. They are easy to install and securely hold a wide range of tools. This blog will help guide the install and provide you with an easy to access tool storage.

With your magnetic wall pin set, you will receive the following:

  • 5x 10mm x 5mm Neodymium magnets
  • 5x screws
  • 5x plugs
  • 5x plastic rosettes

Step 1 – Mark out drill holes

Using a ruler and pencil, mark out your drill holes in your desired locations.


Step 2 – Drill the holes into markings on wall

Drill the holes in to the marked areas using suitable drill bit for the screws you will be using.

Step 3 – Screw in fixture

Place the plastic rosette on the drilled hole and screw into place.

Step 4 – Insert magnet

Once the rosette has been screwed into place, insert one of the magnets.

The magnet should now be securely in place.

Repeat this for the remaining 4 magnetic wall pins and remove any drawn lines.

Alternatively, if you are drilling into brick, follow the below steps:

Step 2a – Drill hole

Drill hole into the brick wall, larger than the size of the screw so that the wall plug will fit.

Step 3a – Insert plug

Insert the wall plug into the wall so that the plug is completely within the drilled hole.

Repeat steps 3 and 4.

You can now hang your favourite tools as you now have the perfect storage solution!

Why not share your magnetic wall pin images with us, we’d love to see how they are helping keep your tools organised! Send any images to for the chance top be featured on our applications page and our social channels!

Fancy trying the magnetic pins yourself? Shop Now:


Comments are closed here.