Custom Magnetic Secondary Glazing Kit
Our custom Magnetic Secondary Glazing Kit is amongst the easiest, quickest, and most cost-effective ways to secondary glaze your windows. This easy-to-remove magnetic secondary glazing kit provides affordable heat and noise insulation whilst reducing condensation and allowing easy instant access to your windows. For more information on the benefits and uses of secondary glazing, view our guide here.
When measuring for your secondary glazing kit, please ensure that the widest and longest measurements of the window are used to ensure for full coverage. Always measure from 20mm before and after the staff bead. Please also allow for a small gap between the trim and the edge of the window of up to 5mm. View our handy measuring guide here!
Please fill out the following form to Ask a Question about this product:
Please fill out the following form to Tell a Friend about this product:
Please fill out the form below and we'll get back to you.
Custom Magnetic Secondary Glazing Kit
(Inc. VAT)£33.34
(Ex. VAT)
- Designed to offer a versatile option for an array of single-glazed window sizes
- Designed to reduce heat loss, outside noise, condensation, and eliminates draughts
- All parts are pre-cut to the required size
- Secure MagFlex® & SteelFlex® strips are pre-attached for simple install
- 3mm thick Acrylic sheet, system is 9.7mm thick when fully installed
- Magnetic trim is 20mm wide
- Easily removable, safe and lightweight secondary glazing kit
- Cost-effective method compared to replacing current windows with UPVC double glazing
Our Magnetic Secondary Glazing Kit is amongst the easiest, quickest, and most cost-effective ways to secondary glaze your windows without any planning permission required.This easy-to-remove magnetic secondary glazing kit provides affordable heat and noise insulation whilst reducing condensation and allowing easy instant access to your windows. This Magnetic Secondary Glazing Kit consists of three key parts, all parts are pre-cut to the sizes supplied during your purchase.
Three parts included:
- White plastic edging attached to transparent window cover
- Magnetic strip attached to white plastic edging using a strong adhesive
- Steel strip with adhesive backing, with protective layers on both sides - both protective sides will need to be removed during installation.
- Please please allow 24-32 hours for the adhesive to dry before installing into place
What's Popular
